Improve Installation (Repair Install)

1. Improve Installation (Repair Install)

If your Windows XP damaged (corrupted) where you do not have any other operating system for booting,

You can perform repair installation (Repair Install) of working settings (settings)

the beginning.

- Make sure you have the key (key) Windows XP valid.

- The entire process will take approximately 1 / 2 or 1 hour, depending on your computer spek.

- If you ask by administrator password, you should select the repair option (repair) the second,

not the first.

- Insert your Windows XP CD and booting from the CD to do it.

- When the option is shown improvement both R = Repair, press R

This will start the repair.

- Press F8 to agree to further the process "I Agree at the Licensing Agreement"

- Press R when the directory where you installed Windows XP. Usually C: \ WINDOWS

Checks will be done next drive C: and start copying files.

And automatically restart if needed. Leave the CD in your drivenya.

- Next you will see a picture "progress bar" that is part of the improvement,

he seem like the installation of XP is usually normal, including "Collecting Information, Dynamic Update,

Preparing Installation, Installing Windows, Finalizing Installation ".

- When asked, click the Next button

- When asked to enter a keyword, enter the key (key) Windows XP your valid.

- Normally you want to remain in the domain or workgroup name the same.

- Computer will restart.

- Then you will have the same screen as the system during normal installation.

- Register if you want it (usually not needed).

- Done

Now you can log in with your existing account.

2. NTOSKRNL Damaged or Missing (Missing or Corrupt)

If you find an error message that "NTOSKRNL not found" / NTOSKRNL not found, do:

- Insert the Windows XP CD and booting from the CD.

- At the time shown R = Repair option first, press R.

- Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate.

- Usually # 1

- Move to drive the CD Drive you are.

- Write: CD i386

- Write: ntkrnlmp.ex_ expand C: \ Windows \ System32 \ ntoskrnl.exe

- If you installed Windows XP in place, then change according to location.

- Remove your CD and type EXIT

3. HAL.DLL Damaged or Missing (Missing or Corrupt)

If you get an error regarding the loss or damaged hal.dll file, it is possible

BOOT.INI file has incorrect configuration (misconfigured).

- Insert the Windows XP CD and booting from the CD.

- At the time shown R = Repair option first, press R.

- Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate.

- Usually # 1

- Write: bootcfg / list

Showing content / BOOT.INI file on the input at this time

- Write: bootcfg / rebuild

Improve the configuration of the BOOT.INI file

- Remove your CD and type EXIT

4. Directory \ WINDOWS \ System32 \ Config is broken or missing

If you find any posts with the error:

"Windows could not start because the following files is missing or corrupt

\ WINDOWS \ System32 \ Config \ SYSTEM or \ WINDOWS \ System32 \ Config \ SOFTWARE "

- Insert the Windows XP CD and booting from the CD.

- At the time shown R = Repair option first, press R.

- Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate.

- Usually # 1

- Enter the administrator password if required.

- Write: cd \ windows \ system32 \ config

- Next depending on the location where the occurrence of the damage:

- Write: ren software software.Damage OR ren system system.damage

- Next again also depends on the location where the occurrence of the damage:

- Write: copy \ windows \ repair \ system

- Write: copy \ windows \ repair \ software

- Remove your CD and type EXIT

5. NTLDR not found or NTDETECT.COM (NTLDR or NTDETECT.COM Not Found)

If you find an error that NTLDR is not found when booting:

a. FAT partition to type

- Please make your booting from the Win98 floppy and copy your files NTLDR or NTDETECT.COM

from the i386 directory to the parent drive / root (root) C: \

b. To partition type NTFS

- Insert the Windows XP CD and booting from the CD.

- At the time shown R = Repair option first, press R.

- Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate.

- Usually # 1

- Enter the administrator password if required.

- Enter the following command, where X: is the address of the CD ROM drive you (Customize!).

- Write: COPY X: \ i386 \ NTLDR C \:

- Write: COPY X: \ i386 \ NTDETECT.COM C: \

- Remove your CD and type EXIT

Source: dadivirus